With the continuous improvement of living standards, a wide range of household appliances are getting into the homes of ordinary people, so home fire is in the upward trend.
Some residents in the decoration lay the wire in the dado, floor, ceiling or even inside the dado and closet, thus often described as "dark lines cross, extending in all directions."
Moreover, some households in the wiring did not take fire - prevention measures, thereby encouraging the potential of fire.
Although they have a little electrical knowledge, the people know that a spark and arc will happen with short circuit of electrical line, overload, too large of wire contact resistance, causing the wire overheat, resulting in fire.
Select the appropriate conductor section of the wire, according to the existing electrical equipment and electrical power of possible future additions, so as to avoid exceeding capacity of the wire or even fire. Meanwhile, use different wires depending on the environment, such as bathrooms, kitchens and other places, so proof- moisture wires should be used because of contacting water.
Lines approach the road, go straight as much as possible to avoid the twists and turns, to reduce the cross- connection. Especially lines between the wires, the fixed points and pipelines must be maintained a safe distance from a ground.
Protective measures should be taken to wear a tube, wires should be
Strongly connected, soldering should be handled to prevent loosening, oxidation when the copper wire is hinged. The insulation should be handled properly in wire joints.
To use fuses and automatic switch for short circuit and overload protection.
Copyright ? 2010 - 2025 zmscable.com All Rights Reserved.
