In recent years, the news of counterfeit and shoddy cable products has emerged in an endless stream.
Many unscrupulous manufacturers in the cable industry have sacrificed product quality for the pursuit of interests, making the cable market a must-have.
As for the quality of the quality, the length is up to standard, consumers are more difficult to determine.
In the past 3.15, some unqualified cable products were ruthlessly exposed, which also sounded the alarm for the cable industry - quality and efficiency, a long way to go.
There are main ways to identify the quality of wire and cable.
At first glance, it is to see if there is a quality system certification.
See if the certificate is standardized.
See if there is a factory name, site, inspection chapter, production date.
See if the trademark, specification, voltage, etc. are printed on the wire and cable.
The main method is:
When purchasing, be sure to check whether there is a “3C” certification mark on the certificate.
The model specifications, rated voltage, length, date of manufacture, certification number, inspection, execution standard, factory name, and factory address are clear.
When purchasing, pay attention to the packaging, the printing should be clear, the model specifications, factory name, and factory address are complete.
Counterfeit and shoddy wires and cables are often "three no products", but there are also ambiguous origins and other signs.
Such as manufacturing in China, manufacturing in a certain province of China or a certain city, which is actually equal to the unmarked place of origin.
When purchasing, pay attention to the appearance of the film to be smooth and round, uniform in color and good in feel.
In the case of rubber wire and cable, the sheath and insulation can be burned with a cigarette but the surface is completely free of damage.
The conductor should have a certain luster and moderate softness, and the conductor size should meet the requirements of national standards.
The cross section of the copper wire of the wire and cable, the superior product copper color is bright and the color is soft, otherwise it is a defective product.
When purchasing weak electric cables, don't try to buy cheap cables.
If you buy only 90m or 80m, or even the length and length of the wire and cable, the length must meet the standard requirements of 100 (+/-) 0.5m.
The surface can be seen to have a regular "unevenness" in the inner mesh, which indicates that the processing technology is good and does not produce relative sliding.
It is a good cable.
The appearance is smooth, and the "unevenness" of the compacted net is not seen.
The pinching of the sheath by hand has a loose feeling, which is a poor cable.
Whether the number is enough for copper meshing, check for solderability, tinned copper wire scrape to see if it is copper wire, the hardness of aluminum-magnesium alloy wire is obviously larger than copper wire.
The mesh is sparse, the distribution is uneven, and the insulation layer is not wrapped.
The tight wait is the difference cable.
Diameter - SYV cable is 0.78-0.8mm, SYWV cable is 1.0mm.
Recently there is a SYV75-5 core wire diameter of 1.0mm cable, the characteristic impedance of this cable is certainly not 75 ohm, not applied to 75 In an ohmic transmission system.
The second test, the test is actually a wire and cable head can be repeatedly bent by hand, any soft touch, good fatigue resistance, plastic or rubber feel elastic and no cracks on the wire and cable insulation is superior.
Copyright ? 2010 - 2025 zmscable.com All Rights Reserved.
